DongGuan Unite Industry Co., Ltd

: The precision shaft is fastened and fastened by fastening bolts between the hollow shaft body and the transmission disc.
The characteristics of the straight optical axis have been very clear, but do you know about its classification? There are three main types of linear optical axis, namely, crankshaft, straight axis and flexible axis, in which the straight axis can be further subdivided, and mainly according to different purposes to be distinguished. Precision axis

: The optical axis needs to be pinpointed in the clapboard and eccentrically operated between the upper and lower plates.
Hollow axis is also a kind of linear optical axis, it is used in a variety of occasions, so the installation of the relevant natural to know. For example, what should we do to install the hollow shaft and the drive plate now? Optic axis

: Precision shaft can be worn or scraped when the gap is large or the gap is small.
If you need to purchase both linear guides and sliders, you can choose the brand that has been approved, and then you need the specifications of linear guides to the manufacturer.

: The optical axis linear guide has good balance and can exert enough pre pressure to increase rigidity.
At present, there are many kinds of linear guideways on the market, and the types of them are also combined by different letters. Even so, the basic structure and parameters are basically the same. What are the main parameters of the linear guide? Optic axis

: Precision shaft installation of linear guides is not just a simple combination of parts and components.
Although the quenched and tempered piston rod has good comprehensiveness and high wear resistance, it is a connecting part supporting the piston to do work, but the premise to obtain these advantages is good processing conditions.

: Optical shaft-quenched and tempered piston rod is a widely used product. It often appears in hydraulic or pneumatic systems.
First of all, we must understand the manufacturing process of quenched and tempered piston rod. It is formed by rolling. A cold hardening layer is formed on the surface of the rolling surface, which helps to reduce the elastic and plastic deformation of the contact surface of the grinding pair, improve the wear resistance of the surface of the cylinder rod, and avoid the burns caused by grinding.

: What happens to the precision shaft at high temperature?
In order to avoid the above phenomena, the piston rod must have sufficient strength and stiffness, and light weight. However,

: Optical axis - observe and see that most of the surface of the piston rod has a chromium plating layer.
The electroplating treatment of piston rod is not simple, but also requires a higher technical content, it is necessary to remind everyone about this.

: How is the processing of precision axis straight optical axis determined?
Firstly, the small machining allowance is used to shorten the processing time and reduce the cost of parts manufacturing. Secondly, sufficient machining allowance should be ensured,

: Optical axis deep shaft long shaft pump adopts open impeller, and axial force is borne by hollow shaft motor.
Auscultation method of long shaft pump deep well pump with the normal operation of the long shaft, accompanied by sound has always been a certain rhythm and rhythm.

News Center	+More
Company news Industry news Home news Hot news
The precision shaft is fastened and fastened by fastening bolts between the hollow shaft body and the transmission disc. The characteristics of the straight optical axis have been very clear, but do you know about its classification? There are three main types of linear optical axis, namely, crankshaft, straight axis and flexible axis, in which the straight axis can be further subdivided, and mainly according to different purposes to be distinguished. Precision axis The optical axis needs to be pinpointed in the clapboard and eccentrically operated between the upper and lower plates. Hollow axis is also a kind of linear optical axis, it is used in a variety of occasions, so the installation of the relevant natural to know. For example, what should we do to install the hollow shaft and the drive plate now? Optic axis Precision shaft can be worn or scraped when the gap is large or the gap is small. If you need to purchase both linear guides and sliders, you can choose the brand that has been approved, and then you need the specifications of linear guides to the manufacturer. The optical axis linear guide has good balance and can exert enough pre pressure to increase rigidity. At present, there are many kinds of linear guideways on the market, and the types of them are also combined by different letters. Even so, the basic structure and parameters are basically the same. What are the main parameters of the linear guide? Optic axis Precision shaft installation of linear guides is not just a simple combination of parts and components. Although the quenched and tempered piston rod has good comprehensiveness and high wear resistance, it is a connecting part supporting the piston to do work, but the premise to obtain these advantages is good processing conditions. Optical shaft-quenched and tempered piston rod is a widely used product. It often appears in hydraulic or pneumatic systems. First of all, we must understand the manufacturing process of quenched and tempered piston rod. It is formed by rolling. A cold hardening layer is formed on the surface of the rolling surface, which helps to reduce the elastic and plastic deformation of the contact surface of the grinding pair, improve the wear resistance of the surface of the cylinder rod, and avoid the burns caused by grinding. What happens to the precision shaft at high temperature? In order to avoid the above phenomena, the piston rod must have sufficient strength and stiffness, and light weight. However, Optical axis - observe and see that most of the surface of the piston rod has a chromium plating layer. The electroplating treatment of piston rod is not simple, but also requires a higher technical content, it is necessary to remind everyone about this. How is the processing of precision axis straight optical axis determined? Firstly, the small machining allowance is used to shorten the processing time and reduce the cost of parts manufacturing. Secondly, sufficient machining allowance should be ensured, Optical axis deep shaft long shaft pump adopts open impeller, and axial force is borne by hollow shaft motor. Auscultation method of long shaft pump deep well pump with the normal operation of the long shaft, accompanied by sound has always been a certain rhythm and rhythm. Only when the optical axis is calculated strictly, can the deformation of the shaft be disturbed by force? The service life is very important for any product, so is the linear optical axis. The service life affects its performance and change in the process of work. So how do we measure the service life of the optical axis? No News！